1. Startseite
  2. Syringe Pump Series
  3. Syringe Pump Series

SPM/4*ZU-I Syringe Pump Series

Produktvorstellung

4.3 inch touch screen control, compact design. Display 8 pump units working parameters and working state in same screen. Friendly interface, easy operation. Split design, mainly for laboratory.

  • Each unit working independently, can set one or some units freely. Each unit can infuse or withdraw different volume in same time or different time.
  • Intelligent calibration, ensure infuse volume accuracy. Online micro adjusting function, convenient to adjust the volume of one units, decrease volume error.
  • Real time monitor, animate display monitor result. Controller can receive traffic alarm of each unit.
  • Back distance setting, can exclude bubbles inside syringe, improve volume accuracy.
  • Fast forward and backward function used for loading syringe, washing and unlock traffic protection.

Technische Daten

Working mode (Five) Infusion, withdrawal, infusion/withdrawal, withdrawal/infusion.
Pump unit 1-8 optional
Syringe size Plastic syringe: 1mL-50mL; Glass syringe: 0.5μL-50mL
Syringe selection Syringe size and customized diameter
Linear speed range 1μm/min-132mm/min (Flow rate=Linear speed* syringe inner cut area)
Min. linear rate 1μm/min
Linear force ≥16kgf
Max. stroke 90mm
Stroke resolution 0.078μm/μstep
Genauigkeit Stroke≥30% maximum stroke, Error≤±0.5%
Back distance 0.01-5mm
Betriebsmodus Independent working mode
Stored modes Can save 10 group working modes
Anzeige Industrial grade 4.3"LCD color display
Steuerungsverfahren Touchscreen und mechanische Tastatur
Speicher bei ausgeschaltetem Gerät Display the previous data parameter after power on again
Externes Steuersignal Start/stop signal, active switch signal: (5-24V)
Kommunikationsschnittstelle RS232/RS485, Modbus protocol(RTU mode)
Controller power supply DC5V/10W
Pump unit power supply DC24V/30W
Umgebungstemperatur 0–40 °C
Relative Luftfeuchtigkeit <80%
Controller dimension 160×150×95(mm)
Controller weight 1.0kg
Pump unit dimension 249×128.9×118 (mm)
Pump unit weight 2.8kg

Abmessungen(Einheit: mm)

Video-Anleitungen

Infusion Demonstration
Real-time Parameter Adjustment
Common Modes Setup
Infusion Demonstration
Real-time Parameter Adjustment
Common Modes Setup